Vista-Systems High Mileage Fuel Systems
Prototype Test Results
Prototype 7 was first tested on a 4 cylinder Toyota engine.
The engine was removed form the vehicle and set up on a test stand.
The engine was started and warmed up to its normal operating temperature.
The manufactures carburetor was then supplied with only one pint of fuel.
The engine was re-started an run under a load at 2000 rpm until running out of fuel.
The engine ran for 5 minutes before running out of fuel.
The manufacture's carburetor was then removed and prototype 7 was installed.
Prototype 7 was supplied with one pint of fuel and run under the same load at 2000 rpm.
This time the engine ran for 20 minutes before running out of fuel.
Prototype 7 Increased the engines Fuel efficiency by 300%
Prototype 11 was installed and test driven on a 7000 pound Chevrolet Olson body walk in van (old potato chip delivery van)
Powered by a V-8 engine and achieved similar results
A 300% increase in fuel efficiency over the manufactures fuel system.
View Prototype 7
View Prototypes 7 and 11 (Includes tank and line sizes and a complete list of components needed to accelerate).
unlike the youtube videos, viewing prototypes 7 11 gives you the tank and line sizes and working pressures needed to get the systems to function.
View Old Patents
Student Vehicle Achieves Over 800 Miles Per Gallon at SAE Event
These You Tube videos are examples of Prototype 7
topics board ListedAT.com
|Web Site Visits Since July 10, 2012 = 1824|
© Vista-Systems | All Rights Reserved
VaporFuel Injection Systems Technology and Associated - Systems